For stamping parts china, processing efficiency of stamping parts is directly related to profits, and stamping parts processing plant most hope to improve the production efficiency of stamping parts.
Stamping parts are needed in many fields, such as ordinary automobile stamping parts, automobile parts stamping parts, electrical parts stamping parts, daily stamping parts, household appliances stamping parts, special aviation stamping parts.
For stamping parts china, processing efficiency of stamping parts is directly related to profits, and stamping parts china most hope to improve the production efficiency of stamping parts. Therefore, let's learn how to improve the processing efficiency of stamping parts.
The mold process card and mold pressure parameters are archived and sorted, and the corresponding nameplate is made, which is installed on the mold or placed on the rack next to the press, so that the parameters can be quickly checked and the height of the installed mold can be adjusted.
Increase self-inspection, mutual inspection and special inspection in the manufacture of cheap metal stamps to prevent quality defects, and improve production quality consciousness and product quality by training the quality knowledge of operators.
Improve the efficiency of mold maintenance. Improve the service life of mold and production efficiency through the maintenance of each batch of mold production.
Mold defects should be timely repaired. Damage to the edge of the knife, welding treatment, mold production, plate deformation should be paid attention to. Machine research and cooperation are also needed.
Various products of cheap metal stamps can be used in many fields and have good application effect. In the production of stamping parts, we should pay attention to the hardness. If the hardness is not enough, there will be a lot of problems, so it is necessary to test the hardness in stamping parts.
With the development of economic society, stamping technology can be applied to various fields, and there are many kinds of cheap metal stamps materials.
The processing of different cheap metal stamps requires different degrees of plate hardness. Hot-rolled steel plate is usually thicker, and the general management department tests hardness by Breitbart hardness tester. Rockwell hardness tester testing between hot-rolled steel plates can also be needed.
For us, Herb scale is an option to use portable Roche hardness tester to test hot-rolled steel plates, which can be analyzed and tested in the enterprise without sampling conditions, and the operation is very simple.
Cold-rolled steel plate used for cheap metal stamps processing is mainly used to test the hardness of Rockwell hardness tester, and generally HRB and HRC scale hardness is larger.
The hardness tester can be used in the metal stamping parts of aluminum alloy plate enterprises for the main purpose of reducing diameter. Materails with different cultural thickness change and island 13 mm can be switched to the barometric hardness tester, and pure aluminum plate or low-hardness aluminum alloy plate should use the bus hardness tester.
In order to achieve surface hardness, many stamping parts china require learning surface heat treatment, such as surface nitriding.